SKU: Klein ET250
Klein ET250 AC/DC Voltage/Continuity Tester
Details
INCLUDES:
• (1) Test Leads
• (3) AAA Batteries
FEATURES:
• Automatically selects voltage or continuity; automatically powers on when any measurement is attempted
• Backlit LCD display
• CAT IV 600V modern solid-state design for safety
• Tests GFCI protected circuits
• Uses standard replaceable multimeter test leads
• Features built-in test lead holders on back of meter
• Integrated flashlight
• 9.8 ft. (3 m) drop protection
• IP53 dust and water resistant
SPECIFICATIONS:
• Type: Digital Voltage and Continuity Tester
• Application: Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly
• Special Features: Built-in Test Lead Holder and Integrated Flashlight
• Material: Thermoplastic; Electronics
• Batteries: 3 x AAA
• Drop Protection: 9-27/32 ft (3m)
• Display: Digital LCD
• Control Type: Digital
• Voltage: 2 to 600V AC/DC
• Frequency: 45 to 400 Hz
• Ingress Protection: IP53 (except test lead jacks)
• Pollution Degree: 2
• Tests Continuity: Yes
• Integral Lead Storage: Yes
• Standard: CAT IV 600V, CE
• Included: Test Leads, Batteries
• Overall Length: 6.06" (154.0 mm)
• Overall Height: 1.64" (41.7 mm)
• Overall Width: 2.31" (58.8 mm)
• Weight: 6.00 oz (170.0 g)
Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions.
• (1) Test Leads
• (3) AAA Batteries
FEATURES:
• Automatically selects voltage or continuity; automatically powers on when any measurement is attempted
• Backlit LCD display
• CAT IV 600V modern solid-state design for safety
• Tests GFCI protected circuits
• Uses standard replaceable multimeter test leads
• Features built-in test lead holders on back of meter
• Integrated flashlight
• 9.8 ft. (3 m) drop protection
• IP53 dust and water resistant
SPECIFICATIONS:
• Type: Digital Voltage and Continuity Tester
• Application: Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly
• Special Features: Built-in Test Lead Holder and Integrated Flashlight
• Material: Thermoplastic; Electronics
• Batteries: 3 x AAA
• Drop Protection: 9-27/32 ft (3m)
• Display: Digital LCD
• Control Type: Digital
• Voltage: 2 to 600V AC/DC
• Frequency: 45 to 400 Hz
• Ingress Protection: IP53 (except test lead jacks)
• Pollution Degree: 2
• Tests Continuity: Yes
• Integral Lead Storage: Yes
• Standard: CAT IV 600V, CE
• Included: Test Leads, Batteries
• Overall Length: 6.06" (154.0 mm)
• Overall Height: 1.64" (41.7 mm)
• Overall Width: 2.31" (58.8 mm)
• Weight: 6.00 oz (170.0 g)
Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions.