• Home
  • Fluke 700PTP-1 Pneumatic Test Pump
SKU: Fluke 700PTP-1
UPC: 095969397711
Weight: 1.03 lbs

Fluke 700PTP-1 Pneumatic Test Pump

List: $799.99 $719.99 + Free Shipping!

You Save 10% ($80)

Special Order - Details

Details

INCLUDES:
• (1) Fluke 700PTP-1 Pneumatic Test Pump
• (1) 1/4 in NPT male to 1/4 in BSP female
• (1) 1 meter of hose
• (2) 1/8 in NPT male quick connects
• (1) 1/8 NPT female to 1/4 in BSP female
• (1) Seal Kit
• (1) Instruction sheet

FEATURES:
• Pump can be easily cleaned without disassembly
• The vernier can be used as a stand-alone low pressure calibration source
• Two pressure ports allowing simultaneous connection:
• ¼ - NPT female fitting for the reference gauge or pressure module
• ¼" NPT female fitting for the unit under test
• Adjustable stroke length can be set to limit the pressure per stroke
• 1st Pressure Port - 3/8-BSP (ISO228) female parallel thread fitting for the reference gauge or pressure module
• 2nd Pressure Port - 1/8-BSP (ISO228) female parallel thread fitting for the unit under test

SPECIFICATIONS:
• Material: Wetted materials: aluminum, silicon, neoprene, stainless steel, Buna-N
• Size (L x W x D): length 8.7 in (220 mm), width 4.8 in (122 mm), depth 3.5 in (89 mm)


The Fluke 700PTP-1 features an integral pressure adjustment vernier which varies the pressurized volume by 2.0 cc over approximately eleven turns of the vernier knob. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume and maximum pressure, the vernier provided 360 - 20 psi adjustment range. With a minimum volume and no pressure applied, the vernier can also be used to provide a 0 to 70" H2O range. Larger volumes will provide a smaller range of adjustment, but greater resolution. The length of the stroke can be adjusted to limit the maximum output pressure. Maximum output pressure is adjustable from 2.5 psi to 600 psi.

CALIFORNIA RESIDENTS:
WARNING Cancer and/or Reproductive Harm – www.p65Warnings.ca.gov