SKU: Aervoe 219
UPC: 088193002193
Weight: 1.2

Aervoe 219 15 oz. Green Marking Chalk Spray

List: $27.24 $6.25
Only 100 left in stock, -99 will be special ordered.

Only 100 left in stock

In Stock

Details

Aervoe 219 Description

A special blend of raw materials that are safe on all surfaces and designed for temporary upside-down marking. A unique, temporary, water-based marking chalk. This product is safe for use at all construction, utility, and survey sites. Aervoe Water-Based Marking Chalk is packaged to operate upside down by hand or in an Aervoe Spot Marker #244, or Marking Stick #245 applicator, with or without the cap on.

Aervoe 219 Includes

  • (1) 15 oz. Marking chalk

Aervoe 219 Features

  • Mark disappears in 10-20 days when exposed to water, traffic, and other abrasions.
  • May also be washed off with a pressure washer

Aervoe 219 Specifications

Color Green
Container Size 20 oz.
Net Weight 15 oz.
Benefits This product is a true water-based formula, not "water added" for cost reduction formula. Adhesion is provided by non-resin binders and low pigment solids in a slurry that holds the chalk together as the mark dries. It is a fast-drying chalk designed for temporary marking. The mark will naturally disappear with water, traffic, or other abrasions.
Uses Aervoe Marking Chalk is designed to temporarily mark most paved surfaces, soil, and grass. Use for utility marking, construction sites, surveying, landscaping, and athletic field marking. For golf course marking, use Aervoe Water-Based Marking Paint. For aisle striping in warehouses, parking lots, or traffic lines, use Aervoe Striping Paint.
Application For aerosol application, shake can well before use and for 1 to 2 minutes after agitator ball is heard. Remove tab from tamper-resistant cap. With proper alignment of the activator bar, this product may be used with the cap on in Aervoe applicators #244/245. Apply paint 3 to 4 inches from surface as a writing tool, and 5 to 8 inches in the applicator for a 3/4-inch line or continuous directional mark. Keep can in motion during use to prevent puddling. Agitate can periodically during application. Clear paint from valve and tip after each use by turning can in an upright position and spraying for 3 to 5 seconds. For best results, use at temperatures between 50°F and 90°F (10°C to 32°C). Bulk paint may be applied in a conventional air spray system or airless pressure sprayer