SKU: DeWalt PFM1411340

Powers Fasteners PFM1411340 Concrete Anchor Screw, 1/2" x 2", 50/Package



• (50) Concrete Anchor Screws, 1/2" x 2"

• International Code Council, Evaluation Service (ICC-ES), ESR-3889 for concrete. Code compliant with 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC.
• Tested in accordance with ACI 355.2 and ICC-ES AC193 for use in structural applications in concrete under the design provisions of ACI 318 (Strength Design Method).
• Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).
• Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement.
• Designed for standard ANSI tolerance drill bits
• Patented thread design offers low installation torque
• Tough threads for tapping high strength concrete
• Ratchet teeth on underside of hex washer head lock against the fixture
• Can be installed closer to the edge than traditional expansion anchors
• Fully removeable and reinstallable in same hole
• Fast installation with powered impact wrench
• Diameter, length and identifying marking stamped on head of each anchor
• One-piece, finished head design

• Anchor Screw Type: Screw Anchor
• Anchor Screw Head Style: Hex Washer
• Anchor Material: Carbon Steel
• Material Grade: Not Graded
• Fastener Finish: Zinc Plated
• Anchor Dia.: 1/2"
• Anchor Length: 2"
• Seismic Approved: Yes
• ICC Approved for Cracked Concrete: Yes
• ICC Approved for Un-Cracked Concrete: Yes
• Min. Embedment: 1-3/4"
• Edge Distance: 1-3/4"
• Drill Bit Size: 1/2"
• Max. Work Thickness: 1/4"
• Ultimate Shear: 6555 lbs
• Ultimate Tension: 3115 lbs
• Application: Racking, Shelving, Material Handling, Fencing, Glazing, Curtain Wall
• Package Quantity: 50 Pieces
• Package Weight: 8.4 lbs

High-strength heavy-duty one-piece Screw Anchors are for use in both cracked and uncracked concrete. They can be easily installed with standard-size drill bits, and are removable, for temporary anchoring. Vibration- and shock-resistant. For use in fastening conveyors, pallet racking, racking guards, motors, bracing, piping, ladders, fencing, beams, angles, or dimensional lumber to concrete or masonry.