Ships in 1 - 10 days!
Part Number: 1791317K UPC: 662755955976 Weight: 336



• Helical cutterhead with 4-sided carbide inserts provides smoother, quieter cutting and finer finish than conventional systems

• 66" long adjustable infeed and outfeed tables provide more working surface

• Fine/quick adjustment lever on infeed table for precision cuts

• Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts

• Enlarged sheet metal stand provides a sturdy base

• 1HP motor offers plenty of power

• Fence controls are center-mounted for convenience

• Push button switch is lockable to prevent accidental starting

• 4" port for dust collection

• Standard Equipment:


• Rabbeting Capacity (In.): NA

• Table Size (L x W) (In.): 66 x 7-1/4

• Helical Knife Size (L x W x T) (In.): 15 x 15 x 2.5

• Dust Port Outside Diameter (In.): 4

• Motor Power (HP): 1

• Cutterhead Speed (RPM): 6,000

• Fence Positive Stops (Deg.): 45, 90, -45

• Outfeed Table Length (In.): 32-1/2

• Motor Voltage (V.): 115/230

• Dust Collection Minimum CFM Required (CFM): 450

• Cutting Capacity (W x D) (In.): 6 x 1/2

• Prewired Voltage (V.): 115

• Motor Phase: 1

• Number of Knives: 40

• Recommended Circuit Size (Amps.): 20/10

• Fence Tilt (Deg.): 45 Forward, 45 Backward

• Motor Current (Amps): 13/6.5

• Fence Size (L x H) (In.): 38 x 4

• Table Height from Floor (In.): 31-1/2

• Infeed Table Length (In.): 32-1/2

This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts – this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.

Customer Reviews