SKU: Milwaukee 4253-1
UPC: 045242013104
Weight: 9.35

Milwaukee 4253-1 1/2-Inch Drill Motor for Magnetic Drill Stands

List: $580.00 $318.69
+ Free Shipping!
Only 2 left in stock, -1 will be special ordered.

Only 2 left in stock

In Stock


Milwaukee 4253-1 Description

The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.

Milwaukee 4253-1 Features

  • 1/2 inch capacity, 6.2 amp motor, 600 RPM
  • 1/2 inch keyed chuck
  • Taps up to 5/8 inch -18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
  • Develops up to 1650 pounds of drill point pressure with a 1 inch steel plate

Milwaukee 4253-1 Specifications

Voltage:120 AC Only
Drill Capacity:1/2"
No Load RPM:600
Chuck or Taper:Chuck
Tap Capacity:5/8"-18
Drill Point Pressure:1,610/1,650 lbs
Tool Weight:8.0 lbs
Shipping Weight:9.7 lbs

IMPORTANT: This item cannot be accepted for a return unless it is unused and in its sealed original packaging. Please contact your local Milwaukee service center for repair or replacements of this item post purchase.