Milwaukee 4210-1 Fixed Position Electromagnetic Drill Press with 3/4" Motor

Milwaukee 4210-1 Specifications:
• Voltage: 120V
• Amps: 12.5
• Drill Capacity: 3/4"
• No Load Speed: 350 RPM
• Cord Type: 9 ft. Fixed
• Construction Type: Grounded
• Electronic Feedback: Yes
• Tap Capacity: 1" -14
• Drill Point Pressure: 1,630/1,670 lbs.
• Adjustable Base: No
• Drill Travel: 9"
• Chuck or Taper: Chuck

Milwaukee 4210-1 Features:
• 3/4" Capacity, 12.5 amp motor, 350 RPM
• Feedback speed control
• Solid state electronic switching
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

All Magnetic Drill Press Sales are Final. Magnetic Drill Presses are covered by the Milwaukee Manufacturers Warranty. In the rare case there is a Defective unit repairs must be handled at your local Milwaukee Service Center. Returns of Milwaukee Magnetic Drills cannot be accepted under any circumstance.