• Home
  • Fein 63134508042 Slugger, 2" x 2" with Pilot (SL200)
SKU: Fein 63134508042

Fein 63134508042 Slugger, 2" x 2" with Pilot (SL200)



• (1) Annular Cutter
• (1) Centering Pin

• Drill holes 3 times faster than twist drills
• Drill unique and curved surfaces
• Allow overlap cuts on existing holes
• Produce reamed quality burr-free holes
• Coolant fed cutting edges
• Produces solid slug.
• Reduce machine size and horsepower requirements
• Manufactured with C.N.C. accuracy
• Resharpenable cutting edges
• Eliminate time consuming, costly pilot holes and step drilling

• Material: High Speed Steel (M2)
• Diameter: 2"
• Shank Diameter: 3/4"
• Drilling Depth: 2"
• Use Fein Pilot #: 16004

The Jancy Slugger uncoated, high-speed steel annular cutter with 2” depth and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and reaming.