• Home
  • Fein
  • Fein 63134222003 8750S, 7/8" x 3" HSS Nova Annular Cutter
SKU: Fein 63134222003

Fein 63134222003 8750S, 7/8" x 3" HSS Nova Annular Cutter



• (1) Annular Cutter

• Drill holes 3 times faster than twist drills
• Drill unique and curved surfaces
• Allow overlap cuts on existing holes
• Produce reamed quality burr-free holes
• Coolant fed cutting edges
• Produces solid slug
• Reduce machine size and horsepower requirements
• Manufactured with C.N.C. accuracy
• Resharpenable cutting edges
• Eliminate time consuming, costly pilot holes and step drilling
• Made from (M2) High Speed Steel for long service life
• 3/4 in. Weldon shank allows cutter to be used with other competitive magnetic drills

• Cutter Diameter: 7/8"
• Shank Diameter: 3/4"
• Maximum Cutting Depth: 3"
• Stack Cut Teeth: Yes
• Pilot Pin Included: No
• Requires Pilot Pin: 16005
• Material: High Speed Steel
• Shank Type: Weldon
• Application: Aluminum and Other Non-Ferrous Metals

The Jancy Slugger uncoated, high-speed steel metric annular cutter with 3” depth and a 3/4” annular cutter shank is used to create metric-sized through holes as deep as 1” in a range of materials, with best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and reaming.