• Home
  • Dixon 2960606C Push-On Hose Mender, Hose ID 3/8", Brass, 2.05" L
SKU: Dixon 2960606C
UPC:
Weight: 0.051 lbs

Dixon 2960606C Push-On Hose Mender, Hose ID 3/8", Brass, 2.05" L

$1.87

In Stock

Details

INCLUDES:
• (1) Push-On Hose Mender, Hose ID 3/8", Brass, 2.05" L

FEATURES:
• No hose clamps or ferrules are needed
• Trim hose end with smooth square cut
• Lubricate either push-on fitting, hose or both
• Insert push-on fitting into hose until first barb is in hose
• Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end
• Push with a steady force until end of hose is covered by yellow plastic cap
• 0.92" L Barb
• No hose clamps or ferrules are needed
• Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only
• Caution: push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

SPECIFICATIONS:
• Material: Brass
• Component Material: Yellow Plastic Cap
• Hose ID : 3/8"
• Length: 2.05"
• Pressure Rating : 350 PSI
• Temperature Range: -40 to +150°F
• Weight: 0.0510 lbs
• Number of Barbs: 2
• Barb Length: .92"
• Dimensions: 2.05" L
• Nominal Size: 3/8"
• Fitting/Connector Type: Mender


Push-On Hose Mender, Brass, 3/8" Hose Inside Diameter (I.D.), 2.05" Length, Yellow Plastic Cap.

CALIFORNIA RESIDENTS:
WARNING Cancer and/or Reproductive Harm – www.p65Warnings.ca.gov