• Home
  • DXSTA151PS 15-Amp GFCI Power Station with Detachable Work Light and Cord Minder Kit
SKU: DeWalt 41594

DXSTA151PS 15-Amp GFCI Power Station with Detachable Work Light and Cord Minder Kit



• (1) 15-Amp GFCI Power Station
• (1) Detachable Work Light
• (2) Cord Minder

• 8 standard 3-prong outlets and 2 USB power ports
• Detachable and rechargeable LED work light built into handle produces up to 500 lumens of illumination with a 4 hour battery life
• Built-in, resettable 15 amp circuit breaker protects against fire hazards from overloads and shorted wires
• In-line GFCI will cut electricity to the entire power station if unintended current flow is detected
• Anti-skid rubber feet keep the unit from moving when used as a light and can be removed to allow for wall mounting
• Includes a pair of mounting brackets to allow easy mounting to DXST100000 or DXST4500 series industrial racks
• 50-pound capacity steel cord minder has rotating end stops able to hold up to 100-feet of 10/3 cable and mounts to DEWALT rack uprights

• Color: Yellow
• Amperage: 15A
• Cord Diameter: 0.43"
• Cord Length: 6'
• Cord/Wire Whickness: 10 Gauge
• Flexible Temperature Range: -40F to 167F
• GFCI Plug: Yes
• Material: ABS Plastic
• Number of Outlets: 8
• USB Port(s): Yes
• Voltage: 120V
• Item Height: 9.00"
• Item Length: 17.50"
• Item Width: 7.40"
• Item Weight: 9.95 lbs

The DEWALT DXSTA151PS 15 Amp GFCI Power Station with Detachable Work Light and Cord Minder Kit is a multi-outlet accessory with a few extra features not found in standard power strips. Suited for both indoor and outdoor use, this power station features 8 standard 3-prong outlets and 2 USB outlets along with a 15-amp GFCI circuit breaker to easily power a wide range of tools and devices. A detachable and rechargeable work light is housed in the handle which itself can rotate 270 degrees allowing it to be used as a targeted spotlight to flood your work area with 500 lumens of illumination for up to four hours on a single charge. When not in use, the 6-foot power station cord can be wrapped around the built-in storage hooks on the back of the power station. The anti-skid rubber feet can be removed and the unit mounted to a wall or under a shelf / overhang or to the upright of either a DXST10000 or DXST4500 series of DEWALT industrial racks using one of the included mounting brackets. To help store additional extension cords the power station comes with a powder-coated steel cord minder bracket set. Large enough to hold up to 100-feet of heavy-duty 10/3 cable and strong enough to support up to 50-pounds, this accessory features spring-loaded, rotating end caps that allow for vertical or horizontal storage of power cords as well as easy cord retrieval. The cord minder mounts easily to the uprights of the 6 or the 4-foot DEWALT storage racks.