SKU: Amprobe 3730217

Amprobe 3730217 LM-200 Professional LED Light Meter with Sensor Cap and Carry Case



• LM-200 LED Light Meter
• 9V Battery (installed)
• Carrying Case
• User Manual

• Lux or footcandle user selectable measurement units
• Measuring range of 200,000 lux or 20,000 foot candles
• Data hold to freeze reading on the digital display
• MAX recording to capture highest light measurement
• Measuring lights source include all visible ranges
• Spectral response close to CIE luminous spectral efficiency
• Angled light cosine correction
• Extended length of wire for light sensor approximately 5 feet (1.5m)
• Measurements according to JISC1609:1993 and CNS 5119 general A class specifications
• Includes protective sensor cap
• Large, 3-1/2 digit display

• LED Light measurement: 200 lux, 2,000 lux, 20,000 lux, 200,000 lux 20, 200, 2,000, 20,000 foot-candle
• Display: 2000 count LCD
• Sensor: Silicon photodiode and filter
• LED light measurement: 3½ digits, 2000 readings
• Power supply: 9V NEDA 1604, IEC 6F22, JIS 006P battery

The Amprobe LM-200LED light meter measures up to 400,000 lumens per square meter (lux) or 40,000 foot-candles (fc) of light output from LED light sources, has a silicon diode sensor and filter, and is designed for indoor operation at altitudes below 2,000 meters. The dual-scale meter also features built-in memory that stores up to 99 records, a data hold feature that freezes readings on the display, a maximum recording option to display the highest reading, and angled light cosine correction to calculate the amount of light, regardless of the light's angle. The meter is powered by a 9V battery (included) which has an average life of 200 hours. The sensor has a 1.5-meter wire for positioning the light sensor, and a protective sensor cap. MEASURES LED LIGHT SOURCES: A professional tester specifically designed to accurately measure light output of the LED light sources. MEASURES LUX OR FOOT-CANDLES: The Amporbe LM-200 has a measuring range of 200,000 lux or 20,000-foot candles. EASY-TO-USE: The sensor has a 1.5-meter wire for positioning the light sensor, and a protective sensor cap