SKU: Amprobe 3027072
UPC: 095969414852
Weight: 0.201 lbs

Amprobe 3027072 ELS2A AC Outlet Line Splitter with Built-In Voltage Measurement Jacks

List: $25.95 $21.91

You Save 16% ($4.04)

Special Order - Details

Details

INCLUDES:
• ELS2A AC Current Clamp Accessory

FEATURES:
• Measures current without splitting AC line cords
• Two measurement loops for increased sensitivity, X1 and X10
• Built-in voltage measurement points to check for voltage sags and surges
• Rated for 120V, 15 Amps

SPECIFICATIONS:
• Rated for 120V, 15 Amps


The Amprobe ELS2A AC Line Splitter allows current measurement on any 2- or 3-wire power cord. Simply plug in the line splitter between the receptacle and the power cord plug to measure current draw with a clamp meter. It has dual measurement loops; The 1X loop is used for direct readings, and the 10X multiplier loop that multiplies signal 10 times to allow low-current measurements with improved accuracy. The ELS2A has built-in voltage measurement jacks to check for voltage and is rated for 120V and 15A. SEPARATES HOT AND NEUTRAL WIRES: Due to the electromagnetic field cancellation effect, clamp meters are unable to show the proper readings when measuring current on power cords when clamped around hot and neutral wires at the same time. This wire splitter separates hot and neutral wires allowing the clamp to properly measure current. BUILT-IN VOLTAGE MEASUREMENT JACKS:The Amprobe ELS2A AC Current Clamp Accessory features built-in voltage measurement jacks to check for voltage sags and surges. Rated for 120V, 15 Amps. TWO LOOPS FOR INCREASED SENSITIVITY: The Amprobe ELS2A AC Current Clamp Accessory includes two loops for increased sensitivity, X1 and X10. The ELS2A measures current without splitting AC line cords.

CALIFORNIA RESIDENTS:
WARNING Cancer and/or Reproductive Harm – www.p65Warnings.ca.gov