   |
|
|
|
FEATURES:
In addition to Powr-Grip's® Dual Vacuum System, this
•DC-powered vacuum lifter features our innovative Quadra-Tilt linkage,
•continuous 360° rotation and a variety of frame configurations,
•for maximum security and versatility at the construction site or in the shop.
•The Quadra-Tilt Vacuum Lifters feature an innovative four-bar tilt mechanism that significantly reduces the effort of tilting heavy loads between flat and upright positions. This tilt mechanism also reduces hazards associated with lifting loads from upright racks: When a load is tilted to either the upright or the flat position, the vacuum lifter maintains the load position automatically without using latches, eliminating the tendency for a load to “kick back” at the operator’s knees.
•The MRTA6-DC vacuum lifters also feature Powr-Grip's Dual Vacuum System, 360° manual rotation, (re)movable vacuum pads and extension arms that accommodate a variety of load sizes and shapes.
•The Dual Vacuum System features two vacuum line circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This system is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155.
•Standard Vacuum Pad Spread:
•MRTA611LDC
• Minimum Width - 12-1/2" [317 mm]
• Maximum Width - 58-3/4" [1491 mm]
• Minimum Length - 46-3/4" [1188 mm]
• Maximum Length - 104-1/2" [2656 mm]
•MRTA6HV11FDC
• subtract 1" [25 mm] from each dimension listed above
•Number / Size of Vacuum Pads:
•MRTA611LDC - 6 / 11" [28 cm] dia. lipped vacuum pads
•MRTA6HV11FDC - 6 / 10" [25 cm] dia. lipped vacuum pads, with closed cell foam rings
• (please specify standard or low-marking rubber)
•Maximum Load Capacity*:
•MRTA611LDC - 1100 lbs [500 kg]
•MRTA6HV11FDC - 900 lbs [410 kg]
•(*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)
•Weight of Vacuum Lifters:
•188 lbs [86 kg]
•Standard Operating Power:
•12 volts DC, 10 amps
•Load Movement:
•Manual rotation, 360° edgewise, with automatic locking at each 1/4 revolution
•Assisted manual tilt, 90° between upright and flat
•Standard Features:
•Dual vacuum system
•Low vacuum warning light and buzzer
•On-board battery and charger
•Battery energy gauge
•Vacuum gauges
•Vacuum line filters
•Vacuum reserve tanks
•Spring-mounted vacuum pads
•(Re)movable vacuum pad mounts
•Vacuum pad extension arms
•Tilt locks
•Available Options:
•Remote control system (EO8RC1)
•Adjustable lift bar extension (LB12AEO)
•Extensions for movable pad mounts (CM6MEVL)
•Cladding pad frame extensions (CF13CEO)
•MRT/MRTA Shipping case (53006)
•Alternative vacuum pads**:
• 9" [23 cm] diameter vacuum pad (VPFS9)
• 10" [25 cm] dia. concave vacuum pad (G0750)
• (**Specifications not as listed above. Please contact us for more information.)
•Alternative vacuum pad materials, including low-marking, temperature resistant
• and chemical resistant compounds
In addition to Powr-Grip's® Dual Vacuum System, this
•DC-powered vacuum lifter features our innovative Quadra-Tilt linkage,
•continuous 360° rotation and a variety of frame configurations,
•for maximum security and versatility at the construction site or in the shop.
•The Quadra-Tilt Vacuum Lifters feature an innovative four-bar tilt mechanism that significantly reduces the effort of tilting heavy loads between flat and upright positions. This tilt mechanism also reduces hazards associated with lifting loads from upright racks: When a load is tilted to either the upright or the flat position, the vacuum lifter maintains the load position automatically without using latches, eliminating the tendency for a load to “kick back” at the operator’s knees.
•The MRTA6-DC vacuum lifters also feature Powr-Grip's Dual Vacuum System, 360° manual rotation, (re)movable vacuum pads and extension arms that accommodate a variety of load sizes and shapes.
•The Dual Vacuum System features two vacuum line circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This system is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155.
•Standard Vacuum Pad Spread:
•MRTA611LDC
• Minimum Width - 12-1/2" [317 mm]
• Maximum Width - 58-3/4" [1491 mm]
• Minimum Length - 46-3/4" [1188 mm]
• Maximum Length - 104-1/2" [2656 mm]
•MRTA6HV11FDC
• subtract 1" [25 mm] from each dimension listed above
•Number / Size of Vacuum Pads:
•MRTA611LDC - 6 / 11" [28 cm] dia. lipped vacuum pads
•MRTA6HV11FDC - 6 / 10" [25 cm] dia. lipped vacuum pads, with closed cell foam rings
• (please specify standard or low-marking rubber)
•Maximum Load Capacity*:
•MRTA611LDC - 1100 lbs [500 kg]
•MRTA6HV11FDC - 900 lbs [410 kg]
•(*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)
•Weight of Vacuum Lifters:
•188 lbs [86 kg]
•Standard Operating Power:
•12 volts DC, 10 amps
•Load Movement:
•Manual rotation, 360° edgewise, with automatic locking at each 1/4 revolution
•Assisted manual tilt, 90° between upright and flat
•Standard Features:
•Dual vacuum system
•Low vacuum warning light and buzzer
•On-board battery and charger
•Battery energy gauge
•Vacuum gauges
•Vacuum line filters
•Vacuum reserve tanks
•Spring-mounted vacuum pads
•(Re)movable vacuum pad mounts
•Vacuum pad extension arms
•Tilt locks
•Available Options:
•Remote control system (EO8RC1)
•Adjustable lift bar extension (LB12AEO)
•Extensions for movable pad mounts (CM6MEVL)
•Cladding pad frame extensions (CF13CEO)
•MRT/MRTA Shipping case (53006)
•Alternative vacuum pads**:
• 9" [23 cm] diameter vacuum pad (VPFS9)
• 10" [25 cm] dia. concave vacuum pad (G0750)
• (**Specifications not as listed above. Please contact us for more information.)
•Alternative vacuum pad materials, including low-marking, temperature resistant
• and chemical resistant compounds
Customer Reviews
