 |
FEATURES:
These vacuum lifters provide an inexpensive way to put
•Powr-Grip's® hand-held vacuum cups to work on a crane, hoist or forklift.
•Standard Vacuum Pad Spread*:
•46" x 57" [1169 x 1448 mm] (to outside edges of vacuum cups)
•Number / Size of Vacuum Cups*:
•6 / 9" [23 cm] diameter vacuum cups
•Load Capacity*:
•700 lbs [320 kg]
•Weight of Vacuum Lifter*:
•75 lbs [34 kg]
•Load Movement:
•Manual rotation, 180° edgewise with locking in three positions
•Manual tilt, 90° between upright and flat, with automatic latching in upright position
• (Lifters can be tilted ONLY when lift bar is locked in center position, as shown above.)
•Standard Features:
•Vacuum lifters are available in horizontal configuration (HFH) for tilting horizontally oriented loads
• or in vertical configuration (HFV) for tilting vertically oriented loads.
•Bolt-on vacuum cup mounts
•Available Options:
•C-frame lift bar (LB3CFL)
•Special sizes and capacities
•Design Standards:
•ASME B30.20-2006
• (BTH-1 Design Category "B", Service Class "0")
•*With Wood's Powr-Grip hand-held vacuum cups (N5450). Use only where vacuum cups can be monitored and repumped if necessary. Vacuum cups sold separately.
These vacuum lifters provide an inexpensive way to put
•Powr-Grip's® hand-held vacuum cups to work on a crane, hoist or forklift.
•Standard Vacuum Pad Spread*:
•46" x 57" [1169 x 1448 mm] (to outside edges of vacuum cups)
•Number / Size of Vacuum Cups*:
•6 / 9" [23 cm] diameter vacuum cups
•Load Capacity*:
•700 lbs [320 kg]
•Weight of Vacuum Lifter*:
•75 lbs [34 kg]
•Load Movement:
•Manual rotation, 180° edgewise with locking in three positions
•Manual tilt, 90° between upright and flat, with automatic latching in upright position
• (Lifters can be tilted ONLY when lift bar is locked in center position, as shown above.)
•Standard Features:
•Vacuum lifters are available in horizontal configuration (HFH) for tilting horizontally oriented loads
• or in vertical configuration (HFV) for tilting vertically oriented loads.
•Bolt-on vacuum cup mounts
•Available Options:
•C-frame lift bar (LB3CFL)
•Special sizes and capacities
•Design Standards:
•ASME B30.20-2006
• (BTH-1 Design Category "B", Service Class "0")
•*With Wood's Powr-Grip hand-held vacuum cups (N5450). Use only where vacuum cups can be monitored and repumped if necessary. Vacuum cups sold separately.
