   |
|
|
|
Senco SFW10XP A06-A08 Specifications:
• 22 Gauge, 3/16 In. Crown, ( A06-A08 / D10 )
• Makes getting into tight spots easier
• Rounded Steel cap, won't harm fabric
• Power (in/lbs): 48
• Height: 5-13/16" (148 mm)
• Lip Length: 1" (25 mm)
• Fastener Capacity: 110 — 185 depending on tool model
• Reg. Operating Pressure: 50—95 psig (3.5—6.6 bar)
Senco SFW10XP A06-A08 Features:
• Shoots Senco "A" wire and "D" wire 3/16" crown staples, 3/16" to 5/8" length.
• Full 1" lip length — Makes getting into tight spots easier
• Rounded steel cap — Won't harm fabric
• Rear exhaust — Keeps oil off fabric
• No muffler to get clogged — Less opportunity for malfunction
• Pinky or push-down magazine release — Makes loading and unloading easier and more comfortable
• Bottom-load magazine — Facilitates easier loading
• Cast aluminum outer rail — Longer life and durability
• Steel lower rail — Extends tool life
• Both U.S. and metric skirt guide cast into outer magazine — No need for tape measure
• No front screw heads — Tool glides through fabric
• Slender main body design — Improved line of sight and access to work
• Compact tool design — Easily reaches tight spots
• Slightly longer magazine — Ability to load full strip even with 25 staples left from previous strip
• Reload window — Indicates when to reload and provides access spot to clean lint from magazine without having to dissassemble the tool
• 22 Gauge, 3/16 In. Crown, ( A06-A08 / D10 )
• Makes getting into tight spots easier
• Rounded Steel cap, won't harm fabric
• Power (in/lbs): 48
• Height: 5-13/16" (148 mm)
• Lip Length: 1" (25 mm)
• Fastener Capacity: 110 — 185 depending on tool model
• Reg. Operating Pressure: 50—95 psig (3.5—6.6 bar)
Senco SFW10XP A06-A08 Features:
• Shoots Senco "A" wire and "D" wire 3/16" crown staples, 3/16" to 5/8" length.
• Full 1" lip length — Makes getting into tight spots easier
• Rounded steel cap — Won't harm fabric
• Rear exhaust — Keeps oil off fabric
• No muffler to get clogged — Less opportunity for malfunction
• Pinky or push-down magazine release — Makes loading and unloading easier and more comfortable
• Bottom-load magazine — Facilitates easier loading
• Cast aluminum outer rail — Longer life and durability
• Steel lower rail — Extends tool life
• Both U.S. and metric skirt guide cast into outer magazine — No need for tape measure
• No front screw heads — Tool glides through fabric
• Slender main body design — Improved line of sight and access to work
• Compact tool design — Easily reaches tight spots
• Slightly longer magazine — Ability to load full strip even with 25 staples left from previous strip
• Reload window — Indicates when to reload and provides access spot to clean lint from magazine without having to dissassemble the tool
Customer Reviews
