   |
|
|
|
Ridgid 27943 Specifications:
• Capacity: 1/2 to 1"
• Barrel/Jaw Swivel: 270 Degrees
• Hydraulic Ram Output: 7,200 Pounds (32kN)
• Operating Temperature Range: 14ºF to 122ºF
Ridgid 27943 Includes:
• (1) Corded Press Tool Kit
• (1) Pro Press 1/2"- 1" Jaws
• (1) Carrying Case RB 330C
Ridgid 27943 Feagtures:
• Designed to mechanically press fittings onto tubing to create a water-tight and permanent seal
• Uses an electrical motor to drive a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force
• The entire pressing cycle lasts approximately five (5) seconds
• Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released
• The LED displays on the back of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required
Compatible with previous Ridgid standard jaws
• Capacity: 1/2 to 1"
• Barrel/Jaw Swivel: 270 Degrees
• Hydraulic Ram Output: 7,200 Pounds (32kN)
• Operating Temperature Range: 14ºF to 122ºF
Ridgid 27943 Includes:
• (1) Corded Press Tool Kit
• (1) Pro Press 1/2"- 1" Jaws
• (1) Carrying Case RB 330C
Ridgid 27943 Feagtures:
• Designed to mechanically press fittings onto tubing to create a water-tight and permanent seal
• Uses an electrical motor to drive a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force
• The entire pressing cycle lasts approximately five (5) seconds
• Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released
• The LED displays on the back of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required
Compatible with previous Ridgid standard jaws
Customer Reviews
