   |
|
|
|
Ridgid 27913 Specifications:
• RP 330-B
• Capacity: 1/2" – 4"
• 270° Barrel/Jaw Swivel
• Battery: 18V Li-Ion
• Battery Charger: 115V
• Hydraulic Ram Output: 7,200 lbs. (32kN)
• Weight: 8.4 lbs.
• Operating Temperature Range: -23°F to 122°F
• Approximate Cycle Time: 5 seconds
• Compatible with previous RIDGID standard jaws
Ridgid 27913 Includes:
• (1) RP 330-B Press Tool
• (2) Batteries
• (1) Battery Charger
• (1) Carrying Case (No Jaws)
Ridgid 27913 Features:
• Designed to mechanically press fittings onto tubing to create a water-tight and permanent seal
• Uses an electrical motor to drive a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force
• The entire pressing cycle lasts approximately five (5) seconds
• Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released
• The LED displays on the back of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required
• Compatible with previous Ridgid Press Jaws
• Powered by a 18V Lithium-Ion Battery, the RP 330-B offers more presses per battery charge than ever before.
• RP 330-B
• Capacity: 1/2" – 4"
• 270° Barrel/Jaw Swivel
• Battery: 18V Li-Ion
• Battery Charger: 115V
• Hydraulic Ram Output: 7,200 lbs. (32kN)
• Weight: 8.4 lbs.
• Operating Temperature Range: -23°F to 122°F
• Approximate Cycle Time: 5 seconds
• Compatible with previous RIDGID standard jaws
Ridgid 27913 Includes:
• (1) RP 330-B Press Tool
• (2) Batteries
• (1) Battery Charger
• (1) Carrying Case (No Jaws)
Ridgid 27913 Features:
• Designed to mechanically press fittings onto tubing to create a water-tight and permanent seal
• Uses an electrical motor to drive a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force
• The entire pressing cycle lasts approximately five (5) seconds
• Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released
• The LED displays on the back of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required
• Compatible with previous Ridgid Press Jaws
• Powered by a 18V Lithium-Ion Battery, the RP 330-B offers more presses per battery charge than ever before.
Customer Reviews
