SKU: Ridgid 48462
UPC: 095691484628
Weight: 376

RIDGID 48462 K-1500G 115 Volt Sectional Machine with 150' C-14 Cable and Tools

List: $7,354.20 $5822.08
Only 0 left in stock, 1 will be special ordered.

Only 0 left in stock

Backorder Available (Ships in 2-5 Weeks) - Details

Details

Features:
  • A gasoline engine makes the K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control
  • Comes equipped to use 11/4" cable to clean 3" to 10" lines through 300 feet (75-250mm, 92m)
  • Low-profile, four-wheel cart easily rolls to the job; guards against machine upset and possible fuel spillage
Specifications:
  • 6HP Gasoline Engine
  • 4-Speed Transmission
  • Forward speeds: 333RPM, 425RPM, 500RPM
  • Reverse Speed: 250RPM
Includes:
  • (1) K-1500G Sectional Machine
  • (10) Sections of C-14 Cable (Total 150 Feet)
  • (1) Three A-8 Cable Carriers
  • (1) A-1 Left-Hand Mitt
  • (1) A-12 Coupling Pin Key
  • (1) A-34-12 Rear Guide Hose
  • (1) A-2864 Hex Key
  • (1) A-3516 Hex Key
  • (1) A-3 Tool Box
  • (1) T-2 Heavy-Duty Straight Auger
  • (1) T-4 Heavy-Duty Funnel Auger
  • (1) T-6 Retrieving Auger
  • (1) T-8 Grease Cutter
  • (1) T-13 Sawtooth Cutter
  • (1) T-50 Sharktooth Cutter.

The Rigid 48462 K-1500G Sectional Machine with C-14 Cable has a gasoline engine that makes the K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast. The Rigid 48462 K-1500G Sectional Machine with C-14 Cable has a unique, easy-to-use, instant-acting cable clutch that maximizes operator control. The Rigid 48462 K-1500G Sectional Machine with C-14 Cable pull down on the handle and the cable spins at 600 RPM and telease frees cable instantly, automatic throttle control idles engine. The Rigid 48462 K-1500G Sectional Machine with C-14 Cable comes equipped to use 11/4" cable to clean 3" to 10" lines through 300 feet (75-250mm, 92m). The Rigid 48462 K-1500G Sectional Machine with C-14 Cable 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM. The Rigid 48462 K-1500G Sectional Machine with C-14 Cable low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.