   |
|
|
|
Milwaukee 6955-20 Specifications:
• Amps: 15.0
• No Load Speed: 3200 RPM
• Blade Diameter: 12"
• Arbor Size: 5/8" or 1"
• Miter Range: 55° Left to 60° Right
• Bevel Range: 48° Left to 48° Right
• Miter Stops-Left: 0°, 15°, 22.5°, 31.6°, 45°, 55°
• Miter Stops-Right: 0°, 15°, 22.5°, 31.6°, 45°, 60°
• Bevel Stops-Left: 0°, 15°, 22.5°, 33.85°, 45°, 48°
• Bevel Stops-Right: 0°, 15°, 22.5°, 33.85°, 45°, 48°
• Tool Weight: 65 lbs.
Milwaukee 6955-20 Includes:
• Carbide tipped blade
• Dust bag
• Blade wrench
Milwaukee 6955-20 Features:
• Miter Angle Digital Readout - provides repeatable accuracy to 0.1°
• Miter Angle Fine Adjust with Detent Override- makes it simple to dial-in precise miter angles
• Dual Integral Jobsite Lights- fully illuminate the work piece and cut line from either side of the blade
• Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor- provides increased power for high performance cutting in hard lumber
• Constant Power Technology with Soft Start- maintains constant cutting speed under load and decreases start up head movement
• Integral Dust Channel- captures up to 75% of the dust and debris cut
• Dual Horizontal Steel Rails with Three Large Linear Bearings- deliver smooth sliding action
• Oversized Single Lever Bevel Adjustment with (9) Positive Bevel Stops allows the saw to easily bevel left and right 0°- 48° and provides fast and accurate adjustments
• Amps: 15.0
• No Load Speed: 3200 RPM
• Blade Diameter: 12"
• Arbor Size: 5/8" or 1"
• Miter Range: 55° Left to 60° Right
• Bevel Range: 48° Left to 48° Right
• Miter Stops-Left: 0°, 15°, 22.5°, 31.6°, 45°, 55°
• Miter Stops-Right: 0°, 15°, 22.5°, 31.6°, 45°, 60°
• Bevel Stops-Left: 0°, 15°, 22.5°, 33.85°, 45°, 48°
• Bevel Stops-Right: 0°, 15°, 22.5°, 33.85°, 45°, 48°
• Tool Weight: 65 lbs.
Milwaukee 6955-20 Includes:
• Carbide tipped blade
• Dust bag
• Blade wrench
Milwaukee 6955-20 Features:
• Miter Angle Digital Readout - provides repeatable accuracy to 0.1°
• Miter Angle Fine Adjust with Detent Override- makes it simple to dial-in precise miter angles
• Dual Integral Jobsite Lights- fully illuminate the work piece and cut line from either side of the blade
• Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor- provides increased power for high performance cutting in hard lumber
• Constant Power Technology with Soft Start- maintains constant cutting speed under load and decreases start up head movement
• Integral Dust Channel- captures up to 75% of the dust and debris cut
• Dual Horizontal Steel Rails with Three Large Linear Bearings- deliver smooth sliding action
• Oversized Single Lever Bevel Adjustment with (9) Positive Bevel Stops allows the saw to easily bevel left and right 0°- 48° and provides fast and accurate adjustments
Customer Reviews
(3 reviews)| 3 Total Reviews | Sort By: |
Was this helpful?
says it all
By
ROBERT L SIMONTON on 01/05/2013
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | ease of operation |
| Cons: | not a top quality blade |
| Recommended: | Yes |
great saw. I've had the same saw in ten inch for a lot of years. It never had any problems. I expect this to do the same, with a hight quality blade.. only use on hard woods.
Share this!
Was this helpful?
HD clicking stops
By
Jim on 12/27/2012
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Nice clicking for all degreee stops |
| Cons: | not a light weight saw |
| Recommended: | Yes |
I've owned over ten compound mitre saws. This round I was looking for a saw that clicked all the degree stops without wavering. This saw does click well at all stops. It also has a digital readout that will tell you where the saw is set. So far, after a couple of months of duty, it still is working fine. I also like the lights on both under sides of the saw. For guys with tiring eyes, this is a great feature. I realize that the lights won't last forever as well as the digital readout in the swinging arm. But while it works, I like it.
Share this!
|
PEOPLE WHO BOUGHT THIS ITEM ALSO BOUGHT
|
