Milwaukee 4270-20 Compact Electromagnetic Drill Press – 450 RPM

Milwaukee 4270-20 Specifications:
•  Voltage: 120V
•  Amps: 9.0
•  Drill Capacity: 1/2"
•  No Load Speed: 450 RPM
•  Cord Type: 8 ft. Fixed
•  Construction Type: Grounded
•  Electronic Feedback: Yes
•  Drill Point Pressure: 750 lbs.
•  Adjustable Base: No
•  Drill Travel: 6.6"
•  Chuck or Taper: Weldon
•  Length: 9-3/8"
•  Height: 15-1/3"

Milwaukee 4270-20 Includes:
•  Lubricant Spray Bottle
•  Nylon Safety Strap
•  (2) Hex Wrenches

Milwaukee 4270-20 Features:
•  Powerful 9.0 amp 1.1 max HP motor
•  Capacity to cut up to 1-1/2" diameter holes thru 2" steel with annular cutters, or 1/2" diameter holes, 4-1/4" deep with twist drill bits
•  Light weight with comfortable carrying handle
•  Two positions for feed handle - relocate without tools
•  Strong two-coil magnet, 2,300 lbs. dead lift (1" steel)
•  Large mushroom motor stop button
•  Simple two-button control panel - unobstructed by feed handle
•  Simple two button control panel located on back for unobstructed operation
•  System positively ejects slugs cut after cut
•  For use on any flat ferrous material 3/8" and thicker
•  Illuminated rocker switch for magnet ***CHUCK NOT INCLUDED*** (48-66-2125)

All Magnetic Drill Press Sales are Final. Magnetic Drill Presses are covered by the Milwaukee Manufacturers Warranty. In the rare case there is a Defective unit repairs must be handled at your local Milwaukee Service Center. Toolup.com will not accept a return of Milwaukee Magnetic Drill Press under any circumstance.