 |
 |
|
 |
|
Milwaukee 4208-1 Specifications:
• Voltage: 120V
• Amps: 12.5
• Drill Capacity: 1-1/4"
• No Load Speed: 500/250 RPM
• Cord Type: 9 ft. Fixed
• Construction Type: Grounded
• Electronic Feedback: Yes
• Tap Capacity: 1"-14
• Drill Point Pressure: 1,530/1,600 lbs.
• Adjustable Base: Yes
• Drill Travel: 11"
• Chuck or Taper: No. 3MT
Milwaukee 4208-1 Includes:
• Electromagnetic Drill Press Base
• No. 3 MT Motor
Milwaukee 4208-1 Features:
• 1-1/4" Capacity, 12.5 amp motor, 500/250 RPM
• Feedback speed control
• Solid state electronic switching
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line
• Voltage: 120V
• Amps: 12.5
• Drill Capacity: 1-1/4"
• No Load Speed: 500/250 RPM
• Cord Type: 9 ft. Fixed
• Construction Type: Grounded
• Electronic Feedback: Yes
• Tap Capacity: 1"-14
• Drill Point Pressure: 1,530/1,600 lbs.
• Adjustable Base: Yes
• Drill Travel: 11"
• Chuck or Taper: No. 3MT
Milwaukee 4208-1 Includes:
• Electromagnetic Drill Press Base
• No. 3 MT Motor
Milwaukee 4208-1 Features:
• 1-1/4" Capacity, 12.5 amp motor, 500/250 RPM
• Feedback speed control
• Solid state electronic switching
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line
All Magnetic Drill Press Sales are Final. Magnetic Drill Presses are covered by the Milwaukee Manufacturers Warranty. In the rare case there is a Defective unit repairs must be handled at your local Milwaukee Service Center. Toolup.com will not accept a return of Milwaukee Magnetic Drill Press under any circumstance.
Customer Reviews
(3 reviews)| 3 Total Reviews | Sort By: |
Was this helpful?
Great product, great price
By
Bryan on 06/12/2012
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Variable speed |
| Cons: | Does not come with a chuck |
| Recommended: | Yes |
This is a great product. The only reason I gave it a 4 star overall rating is because it does not come with a chuck and nowhere could I find that it didn't come with it.
Share this!
Was this helpful?
Bad-ass Power
By
Scott on 02/03/2011
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Nice torque |
| Cons: | none |
| Recommended: | Yes |
Ok...this press is heavy (no more so than most though), but worth it. The variable speed and torque are nice and well controlled. Using bimetal blades I was able to cut 8 4" holes with relative ease and no lose of blade sharpness due to the feedback speed control feature.
Share this!
