   |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Milwaukee 4206-1 Specifications:
• Voltage: 120V
• Amps: 12.5
• Drill Capacity: 3/4"
• No Load Speed: 350 RPM
• Cord Type: 9 ft. Fixed
• Construction Type: Grounded
• Electronic Feedback: Yes
• Tap Capacity: 1"-14
• Drill Point Pressure: 1,630/1,670 lbs.
• Adjustable Base: Yes
• Drill Travel: 11"
• Chuck or Taper: Chuck
Milwaukee 4206-1 Includes:
• Electromagnetic Drill Press Base
• 3/4" Motor
Milwaukee 4206-1 Features:
• 3/4" capacity, 12.5 amp motor, 350 RPM
• Feedback speed control
• Solid state electronic switching
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line
• Voltage: 120V
• Amps: 12.5
• Drill Capacity: 3/4"
• No Load Speed: 350 RPM
• Cord Type: 9 ft. Fixed
• Construction Type: Grounded
• Electronic Feedback: Yes
• Tap Capacity: 1"-14
• Drill Point Pressure: 1,630/1,670 lbs.
• Adjustable Base: Yes
• Drill Travel: 11"
• Chuck or Taper: Chuck
Milwaukee 4206-1 Includes:
• Electromagnetic Drill Press Base
• 3/4" Motor
Milwaukee 4206-1 Features:
• 3/4" capacity, 12.5 amp motor, 350 RPM
• Feedback speed control
• Solid state electronic switching
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line
All Magnetic Drill Press Sales are Final. Magnetic Drill Presses are covered by the Milwaukee Manufacturers Warranty. In the rare case there is a Defective unit repairs must be handled at your local Milwaukee Service Center. Toolup.com will not accept a return of Milwaukee Magnetic Drill Press under any circumstance.
Customer Reviews
(3 reviews)| 3 Total Reviews | Sort By: |
Was this helpful?
life saver
By
charles on 01/04/2012
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | time saving |
| Cons: | none |
| Recommended: | Yes |
making me money
Share this!
Was this helpful?
Great when needed.
By
Ben on 02/03/2011
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Convenient |
| Cons: | limited need |
| Recommended: | Yes |
It is not always necessary to have this tool for my job, but definitely great, when I do. At times it is necessary to get holes into steel bore plates and moving it to a drill press is not an option. I even loaned this out to a friend and saved him a ton, versus his plan to hire a 3rd party to come in and do his drilling. It has paid for itself already.
Share this!
|
PEOPLE WHO BOUGHT THIS ITEM ALSO BOUGHT
|
