   |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Milwaukee 0721-21 Specifications:
• Volts: 28V
• Battery Type: Lithium Ion (Li-Ion)
• RPM: 0-400/ 0-1000
• Torque: 1081 in. lbs.
• Overall Length: 18.5"
• Batteries Included: 1
Milwaukee 0721-21 Includes:
• (1) 28V Li-Ion Battery
• Charger
• Chuck Key
• Side Handle
• Carrying Case
Milwaukee 0721-21 Features:
• Speed control switch for controlled starts
• Convenient, forward/reverse lever
• 28V Milwaukee HIGH POWER MOTOR
• 2-9/16" capacity-drilling 2X material with a selfeed bit
• Heavy-duty gear box, 0-400/ 0-1000 RPM
• Head and handle swivel 360° - Can be locked tight in any position
• Up to 2X the run time of 18V tools
• Delivers up to 40-50% more power
• 28 volts of power at 18 volt battery weight
• Convenient battery fuel gauge shows charge level
V28 weighs in...light
You’d think a 28-volt system with heavy-duty power would weigh almost twice as much as an 18-volt system. Not so, says Meyer. “The V28 technology is so powerful and the weight of a 3.0 amp-hour, 28-volt battery is slightly less than a conventional 18-volt NiCd battery pack.”
Fade-free power: Instead of the gradual but noticeable power decline users expect as a NiCd or NiMH battery pack discharges, the V28 Lithium-Ion cells maintain consistent power. Power doesn’t drop off drastically until the very last hole or cut.
Corded tool power: The higher 3.0 amp-hr. output and 28 volts of muscle mean you can use V28 tools that in the past could only be available as corded. For example, the hammer-drill puts out 600 in.-lbs. of torque, and the circular saw cuts at 4,200 rpm, which is much closer to corded saw speeds than the 3,200 rpm found on NiCd models.
• Volts: 28V
• Battery Type: Lithium Ion (Li-Ion)
• RPM: 0-400/ 0-1000
• Torque: 1081 in. lbs.
• Overall Length: 18.5"
• Batteries Included: 1
Milwaukee 0721-21 Includes:
• (1) 28V Li-Ion Battery
• Charger
• Chuck Key
• Side Handle
• Carrying Case
Milwaukee 0721-21 Features:
• Speed control switch for controlled starts
• Convenient, forward/reverse lever
• 28V Milwaukee HIGH POWER MOTOR
• 2-9/16" capacity-drilling 2X material with a selfeed bit
• Heavy-duty gear box, 0-400/ 0-1000 RPM
• Head and handle swivel 360° - Can be locked tight in any position
• Up to 2X the run time of 18V tools
• Delivers up to 40-50% more power
• 28 volts of power at 18 volt battery weight
• Convenient battery fuel gauge shows charge level
V28 weighs in...light
You’d think a 28-volt system with heavy-duty power would weigh almost twice as much as an 18-volt system. Not so, says Meyer. “The V28 technology is so powerful and the weight of a 3.0 amp-hour, 28-volt battery is slightly less than a conventional 18-volt NiCd battery pack.”
Fade-free power: Instead of the gradual but noticeable power decline users expect as a NiCd or NiMH battery pack discharges, the V28 Lithium-Ion cells maintain consistent power. Power doesn’t drop off drastically until the very last hole or cut.
Corded tool power: The higher 3.0 amp-hr. output and 28 volts of muscle mean you can use V28 tools that in the past could only be available as corded. For example, the hammer-drill puts out 600 in.-lbs. of torque, and the circular saw cuts at 4,200 rpm, which is much closer to corded saw speeds than the 3,200 rpm found on NiCd models.
Customer Reviews
(4 reviews)| 4 Total Reviews | Sort By: |
Was this helpful?
We love it!
By
Henry on 10/23/2012
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Powerful, complete kit |
| Cons: | None |
| Recommended: | Yes |
Very happy that we went with Milwaukee. So far the battery is holding a charge for a long time.
Share this!
Was this helpful?
M28 Right Angle Drill
By
Milton Friesen on 05/10/2011
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Heavey duty, powerful |
| Cons: | None |
| Recommended: | Yes |
Seems like it has enough power to cut through anything. Surprizingly lightweight with excellent battery life.
Share this!
Was this helpful?
RT angle cutter
By
Ted on 02/03/2011
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Angle cutter |
| Cons: | none |
| Recommended: | Yes |
Very much liking this tool. I have used the corded version of this tool for years and always had 1 complaint...The cord! It is awesome to be using a battery version of this. My reluctance initially was that it wouldn't be powerful enough...WRONG>..it was great and kept great torque and power until the battery stopped. No draining down, just a stop! I loved it.
Share this!
Was this helpful?
Stud Cutter
By
James on 01/28/2011
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Great angle cutter |
| Cons: | none |
| Recommended: | Yes |
This product has made my life quite a bit easier. Having to fit plumbing through studs has always posed a challenge. After 3 weeks using this tool, my blood pressure has decreased from this task. At first it was a bit cumbersome adjusting the angles, but after getting in the groove it was well worth it. 2x4 studs are no match for this cutting machine. I have used more powerful machines, but their set up times were much longer. This drill is quick, easy to handle and cuts down on the cutting time by 70%. I will definitely be getting another one for my crew.
Share this!
|
PEOPLE WHO BOUGHT THIS ITEM ALSO BOUGHT
|
