   |
|
|
|
FEATURES:
• Makita-built motor delivers 3,600 RPM for faster cutting in a wide range of metals including Unistrut® all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more
• Compact, ergonomic design at 13-3/4" long and weighs only 5.7 lbs. for reduced operator fatigue
• Built-in L.E.D. light illuminates the work area
• Soft grip handle provides increased comfort on the job
• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles
• 3-year warranty on tool
• Battery and charger sold separately
SPECIFICATIONS:
• Blade Diameter: 5-3/8"
• Arbor: 5/8"
• No Load Speed: 3,600 RPM
• Max Cutting Depth: 2"
• Overall Length: 13-3/4"
• Battery: 18V LXT Lithium-Ion
• Makita-built motor delivers 3,600 RPM for faster cutting in a wide range of metals including Unistrut® all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more
• Compact, ergonomic design at 13-3/4" long and weighs only 5.7 lbs. for reduced operator fatigue
• Built-in L.E.D. light illuminates the work area
• Soft grip handle provides increased comfort on the job
• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles
• 3-year warranty on tool
• Battery and charger sold separately
SPECIFICATIONS:
• Blade Diameter: 5-3/8"
• Arbor: 5/8"
• No Load Speed: 3,600 RPM
• Max Cutting Depth: 2"
• Overall Length: 13-3/4"
• Battery: 18V LXT Lithium-Ion
Customer Reviews
(3 reviews)| 3 Total Reviews | Sort By: |
Was this helpful?
Great Saw
By
Rick C on 06/24/2012
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Small lightweight |
| Cons: | n/a |
| Recommended: | Yes |
I am a commercial electrician, I had one of these saws before and loved it. But it wore out after 5 years. It cuts conduit and unistrut easily. Mine cuts 2' EMT in 1 pass and I cut large EMT all day long with it, nice clean cuts, very little clean up. Just have to spin the pipe a little. I saw this saw at a very low price and it was delivered following day. I'll buy from Tool-up again.
Share this!
Was this helpful?
good tool for sparkys
By
david on 05/10/2011
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | fast clean cuts |
| Cons: | not for cuting in tight spaces |
| Recommended: | Yes |
a great production tool that cuts like a hot knive through butter! wish it was a right side saw.the left side blade is something you get used to. its a light tool wich is good but would be great if the blade could cut 2in conduit in one pass without rotating the pipe.
Share this!
|
PEOPLE WHO BOUGHT THIS ITEM ALSO BOUGHT
|
