   |
|
|
|
Greenlee 6810 Specifications:
• Power Supply: 115 VAC, 15 amps, 60 Hz
• Speed: 4-36 feet per minute (1.2-11 meters per minute)
• Maximum Tractive Force Single Cable: 200 lbs. (.9 kN)
• Maximum Tractive Force All Cables: 800 lbs. (3.5 kN)
• Cable Capacity:
• Quantity x Size
-- 8 x 250 MCM (120 mm2)
-- 6 x 500 MCM (240 mm2)
-- 5 x 750 MCM (300 mm2)
Greenlee 6810 Features:
• Feeds cable at variable speeds to match the speed of cable puller.
• Accommodates cable ranging in size up to 3.5" (88.9 mm) in diameter.
• Sets up easily and can be operated by just one person.
• Dual motors drive each wheel for traction on both sides of the cable.
• Comes with pendant and toggle switch. An optional foot switch (445) is available to control feeding.
• Two cable loading methods; top-loading and end-loading.
• Power Supply: 115 VAC, 15 amps, 60 Hz
• Speed: 4-36 feet per minute (1.2-11 meters per minute)
• Maximum Tractive Force Single Cable: 200 lbs. (.9 kN)
• Maximum Tractive Force All Cables: 800 lbs. (3.5 kN)
• Cable Capacity:
• Quantity x Size
-- 8 x 250 MCM (120 mm2)
-- 6 x 500 MCM (240 mm2)
-- 5 x 750 MCM (300 mm2)
Greenlee 6810 Features:
• Feeds cable at variable speeds to match the speed of cable puller.
• Accommodates cable ranging in size up to 3.5" (88.9 mm) in diameter.
• Sets up easily and can be operated by just one person.
• Dual motors drive each wheel for traction on both sides of the cable.
• Comes with pendant and toggle switch. An optional foot switch (445) is available to control feeding.
• Two cable loading methods; top-loading and end-loading.
Customer Reviews
(1 review)| 1 Total Review | Sort By: |
Was this helpful?
Feeder Feeder
By
Kent Strother on 03/14/2012
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | Saves bodies and backs. Controlled wire feeding. |
| Cons: | Remote controller needs rheostat. |
| Recommended: | Yes |
This is a fantastic tool for pulling large feeder wire. Set-up is fairly straight forward. Once feeder is fixed in place (through tension anchoring or compression bar) and reels set up (preferably in line) it does the job of several persons. The feed determines the ease of the tugging.
One improvement would be to put variable speed at the remote to match tugging speed more easily.
I have used this many times and know without it one is at constant risk of injury.
One improvement would be to put variable speed at the remote to match tugging speed more easily.
I have used this many times and know without it one is at constant risk of injury.
Share this!
|
PEOPLE WHO BOUGHT THIS ITEM ALSO BOUGHT
|
