   |
|
|
|
Greenlee 660 Specifications:
• Quick Change Stainless Steel Hole Cutter Kit (7/8", 1-1/8", 1-3/8", 1-3/4", 2")
Greenlee 660 Includes:
• 645-7/8: 7/8" (22.2 mm), Conduit size 1/2"
• 645-1-1/8: 1-1/8" (28.6 mm), Conduit size 3/4"
• 645-1-3/8: 1-3/8" (34.9 mm), Conduit size 1"
• 645-1-3/4: 1-3/4" (44.4 mm), Conduit size 1-1/4"
• 645-2: 2" (50.8 mm), Conduit size 1-1/2"
• 645-011: Quick Change Arbor for sizes 5/8" through 2-1/4", 3/8" shank
• 645-001: Pilot Drill for sizes 5/8" through 2-1/4"
• Hex Key
• Case
Greenlee 660 Features:
• Cuts stainless steel quickly and easily.
• Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads.
• Removable cutter heads available in sizes from 5/8" through 3".
• Flange stop prevents over-drilling.
• Ejector Spring on all sizes above 3/4" makes removal of slug easier.
• Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking.
• Precision carbide teeth for optimum performance and durability.
• Minimum chuck size of 3/8" (9.5 mm)
• Quick Change Stainless Steel Hole Cutter Kit (7/8", 1-1/8", 1-3/8", 1-3/4", 2")
Greenlee 660 Includes:
• 645-7/8: 7/8" (22.2 mm), Conduit size 1/2"
• 645-1-1/8: 1-1/8" (28.6 mm), Conduit size 3/4"
• 645-1-3/8: 1-3/8" (34.9 mm), Conduit size 1"
• 645-1-3/4: 1-3/4" (44.4 mm), Conduit size 1-1/4"
• 645-2: 2" (50.8 mm), Conduit size 1-1/2"
• 645-011: Quick Change Arbor for sizes 5/8" through 2-1/4", 3/8" shank
• 645-001: Pilot Drill for sizes 5/8" through 2-1/4"
• Hex Key
• Case
Greenlee 660 Features:
• Cuts stainless steel quickly and easily.
• Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads.
• Removable cutter heads available in sizes from 5/8" through 3".
• Flange stop prevents over-drilling.
• Ejector Spring on all sizes above 3/4" makes removal of slug easier.
• Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking.
• Precision carbide teeth for optimum performance and durability.
• Minimum chuck size of 3/8" (9.5 mm)
Customer Reviews
(1 review)| 1 Total Review | Sort By: |
Was this helpful? +1
Buy these
By
[RV]erified User #134810
Megan on 11/16/2010
[RV]erified User #134810
Megan on 11/16/2010
| Quality: |
|
| Function: |
|
| Value: |
|
| Pros: | They actuallly work |
| Cons: | when cutting stainless it will get hot |
| Recommended: | Yes |
I work with 24 gauge stainless sheet and have had little to no luck with explaining to the folks at home improvement stores that rated for metal and rated for stainless are two different things. These bits work. Go slow, keep your pressure even, and keep some water or tapping fluid on hand, they will heat up after a bit, but the final result is worth the wait. I had to drill 50 holes for a project with one bit, and each one is perfect and bur free. No sanding or fish work what so ever. I love these, am so happy I bought the set instead of just the one I needed. I would happily pay whatever Greenlee wanted for a set of smaller bits for my regular work as the pilot bit goes through the sheet like it is not even there.
Share this!
|
PEOPLE WHO BOUGHT THIS ITEM ALSO BOUGHT
|
