The Spindle Speed, Chuck, and Cutter Type The Ridgid 1224 Pipe Threading Machine (Stand & Box sold seperately) 26092 has three important points to know, these include the spindle speed, the chuck, and the cutter type. The spindle speed is 36/12 RPM, it is a two-speed gear box, with a 3:1 ratio, it also has a rear centering ...
All posts in category Equipment and Heavy Machinery
Ridgid 1224 Pipe Threading Machine 26092 Stand & Box sold seperately
May 6, 2013
Posted by Tool Up on May 6, 2013
http://www.toolup.com/blog/ridgid-1224-pipe-threading-machine-26092-stand-box-sold-seperately/
Greenlee Package with Mobile VersiBoom II 6906 UT10-2S
November 25, 2012
The Greenlee Package with Mobile VersiBoom II This Greenlee VersiBoom 11 has been designed with your company’s operator in mind, as it gives you the ability to move the heaviest of product loads, up to 10, 000 pounds total, swiftly and safely. The Greenlee Package with Mobile VersiBoom II 6906 UT10-2S does this with with it’s newly ...
Posted by Tool Up on November 25, 2012
http://www.toolup.com/blog/greenlee-throwmaster-splicers-test-set-0108-0001/
Diamond Products 86911 Rider Saw Curb Cutter 2000 Hydraulic Grinder CC2000
June 26, 2012
A curb cutter is a tool needed for city planning to make a curb cut on local sidewalks for pedestrians. A curb cut is defined as a solid ramp, which is typically but not always constructed of concrete, and is graded down from the top surface of the sidewalk to the surface of the adjoining ...
Posted by Tool Up on June 26, 2012
http://www.toolup.com/blog/diamond-products-86911-rider-curb-cutter-2000-hydraulic-grinder-cc2000/
Diamond Products CC8072-36 36″ Diesel Rider Saw, 74Hp Deutz Motor – 36″ Guard 48542
June 8, 2012
When it comes to cutting through hard or abrasive materials such as concrete, stone, asphalt, bricks, coal balls, glass, and ceramics, diamond blades can deliver two times the cutting, with less total downtime, and consistently accurate depth cuts. A diamond blade is a saw blade that contains actual diamond gems fixed into its base. A ...
Posted by Tool Up on June 8, 2012
http://www.toolup.com/blog/diamond-products-cc8072-36-36-diesel-rider-rider-74hp-deutz-motor-36-guard-48542/
Diamond Products CC7878XL-20 20″ Diesel Walk Behind Ez Rider Joint Saw 74Hp Duetz Diesel 29674
June 4, 2012
A joint saw is needed for industrial use on streets, roadways, and highways, as it prevents the damage heavy traffic incurs on a pavement joint, causing the slab to either move up or down. The slab movement commonly leads to subgrade pumping, which causes pavement damage. City planners know that without planned joints, the newly paved ...
Posted by Tool Up on June 4, 2012
http://www.toolup.com/blog/diamond-products-cc7878xl-20-20-diesel-walk-ez-rider-joint-74hp-duetz-diesel-29674/
