   |
|
|
|
Amana 55388 Specifications:
• Diameter: 1-7/8"
• Carbide height: 1-3/32"
• Shank: 1/2"
• Length: 2-5/8"
Amana 55388 Features:
• The glue joint cut by this bit is strong and self-aligning.
• One setup produces both halves of the joint.
• Adjust the bit so the center of the profile aligns with the stock center.
• Cut one part face down, the mate face up.
• Bit works on stock center between 5/8" and 1" in thickness.
• Must be used in a table-mounted router.
• Since there is a no guide bearing, use the router-table fence to control the cut.
• Diameter: 1-7/8"
• Carbide height: 1-3/32"
• Shank: 1/2"
• Length: 2-5/8"
Amana 55388 Features:
• The glue joint cut by this bit is strong and self-aligning.
• One setup produces both halves of the joint.
• Adjust the bit so the center of the profile aligns with the stock center.
• Cut one part face down, the mate face up.
• Bit works on stock center between 5/8" and 1" in thickness.
• Must be used in a table-mounted router.
• Since there is a no guide bearing, use the router-table fence to control the cut.
Customer Reviews
