 |
Amana 54122 Specifications:
• Diameter: 1-3/8"
• Radius: 1/4"
• Carbide Height: 11/16"
• Shank: 1/4"
• Length: 2-3/16"
Amana 54122 Features:
• The ogee is one the basic shapes used in moldings and decorative profiles.
• An S-shaped curve, it is convex at the top fairing down into a concave (shown inverted).
• The ogee bit is characterized by the concave shape coming off the pilot bearing.
• Using the optional 3/8" bearing produces a profile with a fillet at the convex end of the curve.
• Use in a handheld or table-mounted router.
• Diameter: 1-3/8"
• Radius: 1/4"
• Carbide Height: 11/16"
• Shank: 1/4"
• Length: 2-3/16"
Amana 54122 Features:
• The ogee is one the basic shapes used in moldings and decorative profiles.
• An S-shaped curve, it is convex at the top fairing down into a concave (shown inverted).
• The ogee bit is characterized by the concave shape coming off the pilot bearing.
• Using the optional 3/8" bearing produces a profile with a fillet at the convex end of the curve.
• Use in a handheld or table-mounted router.
