Special Order Details Available for Backorder
Part Number: 96826 UPC: 718127968263 Weight: 75

Description

FEATURES:

In addition to a modular design, these Powr-Grip® vacuum lifters

•provide 180° rotation and 90° tilt, for expandability and a full range

•of load motion at the installation site or on the shop floor.

•Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. These vacuum lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.

•Standard Vacuum Pad Spread:

•P11104DC - 51" x 12" [1295 x 305 mm]

•P11004DC - 49" x 10" [1245 x 254 mm]

•P1HV1104DC - 50" x 11" [1270 x 280 mm]

•Number / Size of Vacuum Pads:

•P11104DC - 4 / 11" [28 cm] dia. lipped vacuum pads (for flat materials)

•P11004DC - 4 / 10" [25 cm] dia. concave vacuum pads (for curved materials)

•P1HV1104DC - 4 / 10" [25 cm] dia. lipped vacuum pads (for rough materials)

•Load Capacity*:

•P11104DC - 700 lbs [320 kg]

•P11004DC - 600 lbs [270 kg]

• (Capacity is reduced on curved surfaces. Please contact us for more information.)

•P1HV1104DC - 600 lbs [270 kg]

•(*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.)

•Average Weight of Vacuum Lifter:

•70 lbs [32 kg]

•Standard Operating Power:

•12 volts DC, 10 amps (for each Pad Channel)

•Load Movement:

•Manual rotation, 180° edgewise, with locking in three positions.

•Manual tilt, 90° between upright and flat, with automatic latching in upright position

• (Lifters can be tilted ONLY when lift bar is locked in center position, as shown above.)

•Standard Features*:

•On-board battery and charger

•Battery energy gauge

•Low vacuum warning light

•Vacuum gauge

•Vacuum line filter

•Vacuum reserve tank

•(*On each Pad Channel)

•Alternative Power Systems:

•Air (venturi) power system (P11104AIRS, P11004AIRS or P1HV1104AIRS)

•AC power system (P11104AC, P11004AC or P1HV1104AC)

•(Specifications may not be as listed above. Please contact us for more information.)

•Available Components:

•Pad Channels: Each channel features an independent, on-board vacuum generating system,

• including vacuum pump, vacuum controls and all standard features listed above.

• PC1104: (for flat materials) 4 / 11" [28 cm] dia. lipped vacuum pads

• PC1004: (for curved materials) 4 / 10" [25 cm] dia. concave vacuum pads

• PCHV1104: (for rough materials) 4 / 10" [25 cm] dia. lipped vacuum pads

•Lift Frames:

• PCFT1A1: For one Pad Channel

• PCFT2SA45: For two Pad Channels, approx. 4-1/2' [1.38 m] vacuum pad spread

• PCFT2SA7: For two Pad Channels, approx. 7' [2.14 m] vacuum pad spread

•Interchangeable Arms: Vacuum pad spread can be changed if optional arms are purchased.

• FA245: Optional arms convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame

• FA27: Optional arms convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame

•Available Options:

•Dual vacuum system (EO10DVS)

•Movable control pendant (EO9RP)

•Remote control system (EO8RC1)

•Individual vacuum pad shutoffs (CM1COWB)

•Closed cell foam vacuum pad rings (FRHV11)

• (Available on P1HV1104 lifters only)

•P1 shipping case (53005)

•Custom Versions:

•P1HV1102DCS

Customer Reviews