In Stock
Part Number: 0928-23 UPC: 045242004096 Weight: 25.305


Milwaukee 0928-23 Specifications:

•  Voltage: 28V

•  Stroke Length: 1-1/8"

•  Sawzall Speed: 0-2,000/0-3,000 spm

•  Drill/Driver Speed: 0-600/0-1800 rpm

•  Torque: 600 in. lbs

•  No Load BPM: 0-9000/0-27,000

•  Chuck Size: 1/2"

•  Clutch Settings: 20

•  Work Light Run-Time: 5 hours

Milwaukee 0928-23 Includes:

•  28V Sawzall Recip Saw

•  28V 1/2" Hammer-Drill/Driver (0724-20)

•  28V Work Light (49-24-0185)

•  (2) 28V Lithium-Ion Battery Packs (48-11-2830)

•  One-Hour Charger (48-59-2801)

•  (2) Sawzall Blades

•  Side Handle

•  Clip-Lok

•  Bit

•  Contractor Bag

Milwaukee 0928-23 Features:

•  Consistent power from the first cut to the last

•  1-1/8" stroke for extremely fast cutting

•  Variable Speed trigger: 0-2000/0-3000spm

•  Exclusive gear protecting clutch

•  Heavy-duty 2 speed gear box: 0-600/0-1800rpm, 0-9000/0-27000bpm

•  Consistent power from the first hole to the last

•  600 in. lbs. of torque

•  Ratcheting, single-sleeve chuck with carbide jaws

•  Clip-Lok system secures tool to belt with one hand

•  Clip-Lok System-ready

•  Faceted reflector, 140° pivoting head

•  5 Hours of run time on single charge

•  Up to 2X the run time of 18V tools

•  Delivers up to 40-50% more power

•  28 volts of power at 18 volt battery weight

•  Convenient battery fuel gauge shows charge level

V28 weighs in...light

You’d think a 28-volt system with heavy-duty power would weigh almost twice as much as an 18-volt system. Not so, says Meyer. “The V28 technology is so powerful and the weight of a 3.0 amp-hour, 28-volt battery is slightly less than a conventional 18-volt NiCd battery pack.”

Fade-free power: Instead of the gradual but noticeable power decline users expect as a NiCd or NiMH battery pack discharges, the V28 Lithium-Ion cells maintain consistent power. Power doesn’t drop off drastically until the very last hole or cut.

Corded tool power: The higher 3.0 amp-hr. output and 28 volts of muscle mean you can use V28 tools that in the past could only be available as corded. For example, the hammer-drill puts out 600 in.-lbs. of torque, and the circular saw cuts at 4,200 rpm, which is much closer to corded saw speeds than the 3,200 rpm found on NiCd models.

Customer Reviews