SKU: Makita XAU01ZB
UPC: 088381723305
Weight: 22.56
Makita XAU01ZB 36V (18V X2) LXT Brushless 10" Pole Saw, 8' Length (Tool Only)
Details
INCLUDES:
• (1) Pole Saw
• (1) Saw Chain
• (1) Guide Bar
• (1) Pole Saw Harness
• (1) Chain Cover
FEATURES:
• Makita-built BL™ Brushless Motor delivers power of a 30cc gas pole saw
• Up to 140 cuts in 4x4 cedar with two 18V LXT® 5.0Ah batteries (batteries not included)
• 20% faster cutting speed than a 31.4cc gas engine pole saw
• Torque boost mode powers through thick or hard branches
• 8 foot fixed length
• Lateral chain tensioning with single stud for efficient chain retention
• Captured bar nut is retained in sprocket cover for convenient setup and maintenance
• Branch hook for pulling trimmed branches from trees
• Translucent bar oil tank with large opening for easier refilling
• Includes 10" sprocket nose guide bar and 3/8" low profile pitch, .050" gauge chain
• Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
• Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
• 3-year limited warranty
• Only use genuine Makita batteries and chargers
SPECIFICATIONS:
• Guide Bar Length: 10"
• Pitch: 3/8" LP
• Gauge: .050"
• Chain Speed: 3940 FPM
• Form Factor (LXT): X2
• Battery: 2X 18V LXT® Lithium-Ion
• Motor Type: Brushless
• Powert Type: Cordless
• Overall Length: 8'
• Net Weight (without battery): 11.7 lbs
• Net Weight (with battery): 14.5 lbs
The 36V (18V X2) LXT® Brushless 10” Pole Saw (XAU01ZB) is a welcome solution for a range of trimming and cutting applications. With zero emissions, lower noise and maximum versatility, the pole saw delivers maximum performance and run time without the hassles of gas and without leaving the 18V LXT battery platform. The pole saw’s shaft is 8-feet in length for efficient pruning of branches. The brushless motor delivers power of a 30cc gas pole saw to handle commercial-duty applications. The XAU01ZB also offers a 20% faster cutting speed than a 31.4cc gas engine pole saw. Torque boost mode helps power through thick or hard branches. The pole saw can make up to 140 cuts in 4x4 cedar with two 18V LXT 5.0Ah Batteries. Other features include a branch hook, translucent bar oil tank with large opening, and Extreme Protection Technology (XPT™). XPT is a protective seal inside the tool, engineered for improved operation in harsh conditions by channeling water and dust from key internal components. It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
• (1) Pole Saw
• (1) Saw Chain
• (1) Guide Bar
• (1) Pole Saw Harness
• (1) Chain Cover
FEATURES:
• Makita-built BL™ Brushless Motor delivers power of a 30cc gas pole saw
• Up to 140 cuts in 4x4 cedar with two 18V LXT® 5.0Ah batteries (batteries not included)
• 20% faster cutting speed than a 31.4cc gas engine pole saw
• Torque boost mode powers through thick or hard branches
• 8 foot fixed length
• Lateral chain tensioning with single stud for efficient chain retention
• Captured bar nut is retained in sprocket cover for convenient setup and maintenance
• Branch hook for pulling trimmed branches from trees
• Translucent bar oil tank with large opening for easier refilling
• Includes 10" sprocket nose guide bar and 3/8" low profile pitch, .050" gauge chain
• Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
• Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
• 3-year limited warranty
• Only use genuine Makita batteries and chargers
SPECIFICATIONS:
• Guide Bar Length: 10"
• Pitch: 3/8" LP
• Gauge: .050"
• Chain Speed: 3940 FPM
• Form Factor (LXT): X2
• Battery: 2X 18V LXT® Lithium-Ion
• Motor Type: Brushless
• Powert Type: Cordless
• Overall Length: 8'
• Net Weight (without battery): 11.7 lbs
• Net Weight (with battery): 14.5 lbs
The 36V (18V X2) LXT® Brushless 10” Pole Saw (XAU01ZB) is a welcome solution for a range of trimming and cutting applications. With zero emissions, lower noise and maximum versatility, the pole saw delivers maximum performance and run time without the hassles of gas and without leaving the 18V LXT battery platform. The pole saw’s shaft is 8-feet in length for efficient pruning of branches. The brushless motor delivers power of a 30cc gas pole saw to handle commercial-duty applications. The XAU01ZB also offers a 20% faster cutting speed than a 31.4cc gas engine pole saw. Torque boost mode helps power through thick or hard branches. The pole saw can make up to 140 cuts in 4x4 cedar with two 18V LXT 5.0Ah Batteries. Other features include a branch hook, translucent bar oil tank with large opening, and Extreme Protection Technology (XPT™). XPT is a protective seal inside the tool, engineered for improved operation in harsh conditions by channeling water and dust from key internal components. It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.