Special Order Details Available for Backorder
Part Number: EK425LDO11 UPC: 783310520283 Weight: 13.9


  • Crimping Tool
  • CJD3O Jaws
  • 120V Charger
  • 120V Battery

  • The EK425L is operated withone hand, leaving the other hand free to position the cableand connector
  • The crimping jaws open wide to fit easily over connectors
  • To help prepare for a crimp, the jaws can be jogged closed until they just grip the connector, allowing the operatorto position the cable in the connector before finishing thecrimp
  • The EK425L will complete about 325 crimps per battery charge on 4/0 AWG splices
  • When a crimp is fully completed, the EK425L signals the operator by automatically opening the jaws
  • It is then ready to make the next crimp
  • And, when the crimping jaws need to be opened before a crimp is complete, the operatorcan simply push a button on the back side of the tool
  • Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp andprovides the operator a visual and audible alert if the force is below specifications

  • Accessory : CJXPJ Crimping Jaw With Nicopress X, P, And J Die Grooves, CJB Cutting Jaw For One-Time Disposable Lock Hasps, CJ22 Crimping Jaw For Use With KC22 And KA22 Crimping Dies, KD6-27 WStyle Cutter Dies For ACSR To4/0 AWG, F020735 Kearney D Crimping Die (Adap
  • Battery : 18 V, 3.0 AMP-HR Lithium-Ion
  • Battery Charger : 120 V
  • Battery Charge Time : 30 MINT
  • Crimp Cycle Time : Approximately 4 S
  • Crimping Capacity : Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
  • Crimping Force : 6.000 TON (54.000 KN)
  • Estimated Cycles per Charge : Approximately 325
  • Handle Type : Cushioned Grip Ergonomic
  • Jaw : CJD3O
  • Length With Jaws : 18-1/2 IN (470.000 MM)
  • Replacement Part : CJD3O Crimping Jaw Unit-D3 And O Die Grooves, CJD3BG Crimping Jaw Unit-D3 And BG Die Grooves, CJK Crimping Jaw Unit ForKearney O Dies, CJD3 CrimpingJaw With Single D3 Die Groove, 52176 18 V 3.0 AMP-HR Li-IonBattery, CP1 Tool Pouch
  • Sub Brand : Gator
  • Weight With Jaws : 6.800 LB (3.000 KG)
  • Width Head Open : 4.000 IN (108.000 MM)

Customer Reviews