SKU: Amprobe 4210340
UPC: 095969640862
Weight: 1.87392923

Amprobe 4210340 AM-570 1000V AC/DC True RMS Digital Industrial Multimeter

List: $287.99 $234.99
+ Free Shipping!
Only 0 left in stock, 1 will be special ordered.

Only 0 left in stock

Backorder Available (Ships in 2-5 Weeks) - Details

Details

Amprobe 4210340 Description

The Amprobe AM-570 is the best multimeter in its class designed for professional electricians and HVAC technicians who need to maintain, service or troubleshoot advanced electrical systems in the most demanding environments. Packed full of features such as True RMS, dual thermocouples for taking differential temperature measurements, a low impedance function to detect stray voltage, and a low pass filter to accurately take measurements on variable frequency drives, the Amprobe AM-570 Digital Multimeter allows for quick go/no-go checks without the need for an additional tool. Multimeters are indispensable electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. The AM-570 can be used to diagnose electrical problems in electrical equipment, wiring, and power supplies. With the included temperature thermocouples and test leads, this multimeter can be connected to a circuit or device to measure its electrical or performance properties to confirm functionality. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. This multimeter has been designed for use in industrial environments to test voltages up to 1000V and 10A. This meter is rated Category IV/600V, Category III/1000V. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. PACKED WITH FEATURES: The Amprobe AM-570 Industrial Digital Multimeter with True RMS is a digital multimeter that measures AC/DC voltage to 1,000V, AC/DC current to 10A, frequency to 60 MHz, resistance to 60 megaohms, capacitance to 60 millifarads, and temperature from -40 to +1832 degrees F (-40 to +1000 degrees C). It also performs audible continuity tests and diode tests. WHAT IS TRUE-RMS METER?: True RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. NON-CONTACT VOLTAGE DETECTION ENHANCES SAFETY: The AM-570 features a built-in flashlight to see wires and fuses in the dark, a rubber tilt stand and probe holder to give you the 'third-hand' you need while taking measurements.

Amprobe 4210340 Includes

  • AM-570 Digital Multimeter
  • Test Leads
  • (2) Type-K Probe
  • Temperature Adapter
  • 9V Battery (installed)
  • Velcro Strap
  • Carrying Case
  • User Manual

Amprobe 4210340 Features

  • True-RMS technology improves accuracy in electrically noisy environments
  • Measures AC/DC Voltage up to 1000V, AC/DC current, resistance, frequency, capacitance, temperature, and duty cycle
  • Low Z mode detects stray voltages
  • Low pass filter accurately measures voltage on variable frequency drives
  • Peak hold (crest) captures and holds the peak value of a voltage or current surge
  • Non-contact voltage detection enhances safety
  • Audible continuity quickly identifies shorts and opens
  • Diode test to verify diode polarity
  • Data hold freezes the reading on the display for further analysis
  • MIN/MAX recording records min/max measurements over time to show voltage fluctuations
  • Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
  • Warning alerts against improper test leads connection
  • Combines user friendly features such as, auto power-off to conserve battery life, low battery warning, a “third hand test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter
  • Dual reading backlit LCD display with analog bar graph makes it easy to view results

Amprobe 4210340 Specifications

True-rms Yes
AC Voltage 6.000 V, 60.00 V, 600.0 V, 1000 V
DC Voltage 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
AC Current 600.0 ?A, 6000 ?A, 60.00 mA, 500.0 mA, 10.00 A
DC Current 600.0 ?A, 6000 ?A, 60.00 mA, 500.0 mA, 10.00 A
Frequency 60.00 Hz, 600.0 Hz, 6.000 kHz, 60.00 kHz, 600.0 kHz, 6.000 MHz, 60.00 MHz
Resistance 600.0 ?, 6.000 k?, 60.00 k?, 600.0 k? 6.000 M? 60.00 M?
Capacitance 60.00 nF, 600.0 nF, 6.000 ?F, 60.00 ?F, 600.0 ?F, 6000 ?F, 60.00 mF
Temperature -40 ?F to 1832 ?F, -40 ?C to 1000 ?C
Number of temperature inputs Dual Thermocouple
Duty cycle 10.00% to 90.00%